CFE> nvram erase
*** command status = 0
CFE> tftpd
Start TFTP server
Reading :: Done. 28123194 bytes read
Programming...done. 28123194 bytes written
Skip writing CHK checksum for nflash.
Digital core power voltage set to 1.05V
Decompressing...done


CFE for Foxconn Router R7800/R8500 version: v1.0.5
Build Date: Tue Jun 30 20:39:15 CST 2015
Init Arena
Init Devs.
Boot up from NAND flash...
Bootcode Boot partition size = 524288(0x80000)
DDR Clock: 400 MHz
Info: DDR frequency set from clkfreq=1400,*800*
Warning: invalid DDR setting of 800 MHz ignored. DDR frequency will be set to 400 MHz.
Warning: invalid CPU setting of 1400 MHz ignored. armclock frequency will be set to 1000 MHz.
et2: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.121 (r552363)
CPU type 0x0: 1000MHz
Tot mem: 524288 KBytes

Committing NVRAM...done
Waiting for reset button release...donDigital core power voltage set to 1.05V
Decompressing...done
Digital core power voltage set to 1.05V

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S30000207
000016A0


RDLYW0 00000004

RDENW0 00000041

RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----+++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
 01 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 02 -------+++++++++++++++++++++++++++X++++++++++++++++++++++++++---
 03 --------++++++++++++++++++++++++++++X++++++++++++++++++++++++++-
 04 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 05 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 06 ---+++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 07 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 08 -----++++++++++++++++++++++++++X++++++++++++++++++++++++++------
 09 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 10 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++--
 11 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 12 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
 13 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 14 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
 15 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++


PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ---++++++++++++++++++++++++++++X++++++++++++++++++++++++++++----
 01 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 02 ----++++++++++++++++++++++++++++X++++++++++++++++++++++++++++---
 03 -----+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-
 04 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
 05 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 06 +++++++++++++++++++++++++++X++++++++++++++++++++++++++----------
 07 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 08 -++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------
 09 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++
 10 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--
 11 ---------------++++++++++++++++++++++++X++++++++++++++++++++++++
 12 ----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++----
 13 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 14 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
 15 ------------++++++++++++++++++++++++++X+++++++++++++++++++++++++


NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----++++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
 01 -------------+++++++++++++++++++++++++X+++++++++++++++++++++++++
 02 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 03 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 04 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
 05 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 06 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
 07 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 08 -----+++++++++++++++++++++++++++X++++++++++++++++++++++++++-----
 09 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 10 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++++
 11 -----------------+++++++++++++++++++++++X+++++++++++++++++++++++
 12 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
 13 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++
 14 ---------+++++++++++++++++++++++++++X++++++++++++++++++++++++++-
 15 ----------------++++++++++++++++++++++++X+++++++++++++++++++++++


WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++++++X+++++++++++++++++++++++++---------+++-
 01 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
 02 ++++++++++++++++++++++++++X++++++++++++++++++++++++++--------++-
 03 +++++++++++++++++++++++++++X++++++++++++++++++++++++++-------++-
 04 ++++++++++++++++++++++++X++++++++++++++++++++++++-----------+++-
 05 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++-----+++-
 06 ++++++++++++++++++++++++X++++++++++++++++++++++++-----------+++-
 07 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++------+-
 08 ++++++++++++++++++++++++++X++++++++++++++++++++++++++-------+++-
 09 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++--------
 10 ++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--------
 11 -------++++++++++++++++++++++++X++++++++++++++++++++++++--------
 12 +++++++++++++++++++++++++++X++++++++++++++++++++++++++--------+-
 13 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
 14 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
 15 --------++++++++++++++++++++++++X+++++++++++++++++++++++--------


WRDMW0 00000026
WRDMW0 00000028


ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ++++++++++++++++++++++S++++++++X++++++++++++++++++++++++++++++++

Decompressing...done


CFE for Foxconn Router R7800/R8500 version: v1.0.5
Build Date: Tue Jun 30 20:39:15 CST 2015
Init Arena
Init Devs.
Boot up from NAND flash...
Bootcode Boot partition size = 524288(0x80000)
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1400,*800*
et2: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.121 (r552363)
CPU type 0x0: 1400MHz
Tot mem: 524288 KBytes

Device eth0:  hwaddr B0-7F-B9-89-FD-E2, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Startup canceled
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> ^C
CFE> nvram erase
*** command status = 0
CFE> go
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ..... 5461920 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
[    1.470000] console [ttyS0] enabled, bootconsole disabled
[    1.480000] serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
[    1.490000] brd: module loaded
[    1.490000] loop: module loaded
[    1.500000] pflash: found no supported devices
[    1.500000] bcmsflash: found no supported devices
[    2.080000] Boot partition size = 524288(0x80000)
[    2.090000] lookup_nflash_rootfs_offset: offset = 0x200000
[    2.090000] nflash: squash filesystem with lzma found at block 32
[    2.100000] Creating 17 MTD partitions on "nflash":
[    2.100000] 0x000000000000-0x000000080000 : "boot"
[    2.110000] 0x000000080000-0x000000200000 : "nvram"
[    2.130000] 0x000000200000-0x000006f00000 : "linux"
[    2.620000] 0x000000419b64-0x000006f00000 : "rootfs"
[    2.630000] 0x000007400000-0x000007480000 : "board_data"
[    2.640000] 0x000007480000-0x000007580000 : "POT1"
[    2.650000] 0x000007580000-0x000007680000 : "POT2"
[    2.660000] 0x000007680000-0x000007940000 : "T_Meter1"
[    2.670000] 0x000007940000-0x000007c00000 : "T_Meter2"
[    2.690000] 0x000007c00000-0x000007c80000 : "ML1"
[    2.700000] 0x000007c80000-0x000007d00000 : "ML2"
[    2.710000] 0x000007d00000-0x000007d80000 : "ML3"
[    2.710000] 0x000007d80000-0x000007e00000 : "ML4"
[    2.720000] 0x000007e00000-0x000007e80000 : "ML5"
[    2.730000] 0x000007e80000-0x000007f00000 : "ML6"
[    2.740000] 0x000007f00000-0x000007f80000 : "ML7"
[    2.750000] 0x000007f80000-0x000008000000 : "DebugMsg"
[    2.750000] PPP generic driver version 2.4.2
[    2.760000] PPP MPPE Compression module registered
[    2.760000] NET: Registered protocol family 24
[    2.770000] PPPoL2TP kernel driver, V0.17
[    2.770000] tun: Universal TUN/TAP device driver, 1.6
[    2.780000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.780000] csw_retry 100
[    2.790000] Initializing USB Mass Storage driver...
[    2.790000] usbcore: registered new interface driver usb-storage
[    2.800000] USB Mass Storage support registered.
[    2.800000] usbcore: registered new interface driver usbserial
[    2.810000] USB Serial support registered for generic
[    2.810000] usbcore: registered new interface driver usbserial_generic
[    2.820000] usbserial: USB Serial Driver core
[    2.820000] USB Serial support registered for GSM modem (1-port)
[    2.830000] usbcore: registered new interface driver option
[    2.840000] option: v0.7.2:USB Driver for GSM modems
[    2.840000] USB Serial support registered for Sierra USB modem
[    2.850000] usbcore: registered new interface driver sierra
[    2.850000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[    2.860000] u32 classifier
[    2.860000]     Actions configured
[    2.870000] nf_conntrack version 0.5.0 (8030 buckets, 32120 max)
[    2.870000] IPv4 over IPv4 tunneling driver
[    2.880000] GRE over IPv4 tunneling driver
[    2.880000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.890000] TCP cubic registered
[    2.890000] NET: Registered protocol family 10
[    2.890000] lo: Disabled Privacy Extensions
[    2.900000] tunl0: Disabled Privacy Extensions
[    2.900000] IPv6 over IPv4 tunneling driver
[    2.910000] sit0: Disabled Privacy Extensions
[    2.910000] ip6tnl0: Disabled Privacy Extensions
[    2.920000] NET: Registered protocol family 17
[    2.920000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    2.930000] All bugs added by David S. Miller <davem@redhat.com>
[    2.960000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[    2.970000] NAND device: Manufacturer ID: 0x01, Chip ID: 0xf1 (AMD NAND 128MiB 3,3V 8-bit)
[    2.980000] Spare area=64 eccbytes 56, ecc bytes located at:
[    2.980000]  2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[    3.000000] Available 7 bytes at (off,len):
[    3.000000] (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
[    3.010000] Scanning device for bad blocks
[    3.590000] Options: NO_AUTOINCR,NO_READRDY,BBT_SCAN2NDPAGE,
[    3.600000] Creating 2 MTD partitions on "brcmnand":
[    3.600000] 0x000003400000-0x000006f00000 : "brcmnand"
[    3.610000] 0x000006f00000-0x000007400000 : "OpenVPN"
[    3.620000] SQUASHFS error: Xattrs in filesystem, these will be ignored
[    3.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    3.640000] devtmpfs: mounted
[    3.640000] Freeing init memory: 292K
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Restoring defaults...Reading board data...
hwtype=R8500<,hwrev=MP1
WSC UUID: 0x5da19f18b9eab9b937b032c7024c5daa
wps_uuid=0x5da19f18b9eab9b937b032c7024c5daa
read_board_data(662) region_num=9 2 (JP)
NTP synchronized date/time: Mon May 28 08:02:57 2018
MAC address of 1st STA connected: 60-F1-89-E1-D3-BB
### main:1640 Set Normal Power!
Doing nvram commit by pid 1 !
done
Reading board data...
hwtype=R8500<,hwrev=MP1
WSC UUID: 0x5da19f18b9eab9b937b032c7024c5daa
wps_uuid=0x5da19f18b9eab9b937b032c7024c5daa
read_board_data(662) region_num=9 2 (JP)
NTP synchronized date/time: Mon May 28 08:02:57 2018
MAC address of 1st STA connected: 60-F1-89-E1-D3-BB
### main:1640 Set Normal Power!
[    9.650000] Initialise conn table 2048 entries
[    9.730000] bcm_robo_config_vlan 2376 is_erobo=0 vid=1 untag|member=0x17DBE ports=1 2 3 4 5 7 8*<
[    9.740000] bcm_robo_config_vlan 2376 is_erobo=0 vid=2 untag|member=0x20301 ports=0 8u<
[    9.770000] bcm_robo_config_vlan 2376 is_erobo=0 vid=1 untag|member=0x17DBE ports=1 2 3 4 5 7 8*<
[    9.780000] bcm_robo_config_vlan 2376 is_erobo=0 vid=2 untag|member=0x20301 ports=0 8u<
[    9.820000] bcm_robo_config_vlan 2376 is_erobo=1 vid=1 untag|member=0x7E3F ports=0 1 2 3 4 5u<
[   11.120000] bcm_robo_config_vlan 2376 is_erobo=1 vid=1 untag|member=0x7E3F ports=0 1 2 3 4 5u<
insmod: dpsta.ko: no module by that name found
insmod: cannot insert '/lib/modules/2.6.36.4brcmarm+/kernel/drivers/net/dhd/dhd.ko': Operation not permitted (-1): Operation not permitted
insmod: usbcore.ko: no module by that name found
insmod: cannot insert '/lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ehci-hcd.ko': Unknown symbol in module (-1): No such file or directory
insmod: wl_high.ko: no module by that name found
eth1: cmd=14: No such device
wl-1 not up in 3 sec
[   20.590000] Sorry, registering the character device  failed with 0
Hit enter to continue...[   21.680000] bcm_robo_config_vlan 2376 is_erobo=0 vid=1 untag|member=0x17DBE ports=1 2 3 4 5 7 8*<
[   21.690000] bcm_robo_config_vlan 2376 is_erobo=0 vid=2 untag|member=0x20301 ports=0 8u<
[   21.720000] bcm_robo_config_vlan 2376 is_erobo=0 vid=1 untag|member=0x17DBE ports=1 2 3 4 5 7 8*<
[   21.730000] bcm_robo_config_vlan 2376 is_erobo=0 vid=2 untag|member=0x20301 ports=0 8u<
WARNING: console log level set to 1
killall: upnp: no process killed
upnp: No such file or directory

### nas: May 26 2015 02:38:35 version 7.14.124.102 (r558912)
ACSD >>main(503): No interface specified, exiting...wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
Reading board data...
hwtype=R8500<,hwrev=MP1
WSC UUID: 0x5da19f18b9eab9b937b032c7024c5daa
wps_uuid=0x5da19f18b9eab9b937b032c7024c5daa
read_board_data(662) region_num=9 2 (JP)
insmod: jnl.ko: no module by that name found
abPortTrunkingInit dynamic
wl: wl driver adapter not found
[   25.970000] Initialise conn table 2048 entries
Failed to open file '/etc/avahi/avahi-daemon.conf': No such file or directory

###################################mount openvpn mtdblock18
killall: dhd_monitor: no process killed
scandir: No such file or directory
/usr/sbin/dhd_monitor: could not scan /tmp/media/nand//crash_logs folder
[set_CTF_Router_Mode]:ioctl_set_msg failed:-574567296
init_led_button ENABLE_BLINK
No [   28.940000] acosFW_accessCtrlEnable 2694 bEnable: 0
ACL rule order defined! Init all rules [   28.950000] acosFW_accessCtrlMode 2701 mode: 1
ord[   28.950000] acosFW_accessCtrlConfig 2708
er to 0!
interface br0 IP address is 192.168.1.1
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
sh: /sbin/tmd: not found
mevent start...
opened loopback socket 3
shm ID: 32769
 Get a correct Segment_ID: 32769 and semaphore ID:32769
Can't find handler for ASP command: wlg_cgi_get_isolation_status(0);
Can't find handler for ASP command: wlg_cgi_get_isolation_status(1);
Can't find handler for ASP command: genie_cgi_need_to_load_basic();
Can't find handler for ASP command: isPortTrunking("is_ptk_start");
Can't find handler for ASP command: isPortTrunking("is_ptk_end");
Can't find handler for ASP command: basic_cgi_get_cur_choice_nvram("wan_proto");
Can't find handler for ASP command: eco_get_redirect_link();
POT integrity check OK.
Can't find handler for ASP command: gui_get_opmode_param("devname_consolidation_support", "1", "/*");
Can't find handler for ASP command: gui_get_opmode_param("devname_consolidation_support", "1", "*/");
Can't find handler for ASP command: wlg_cgi_get_isolation_status();
Can't find handler for ASP command: gui_get_guest_or_admin_mode("0");
Can't find handler for ASP command: gui_get_guest_or_admin_mode("1");
Can't find handler for ASP command: gui_get_guest_or_admin_mode("2");
POT time is up.
Can't find handler for ASP command: qos_cgi_get_bandwidth("ToSet_qos_bw_uplink");
Can't find handler for ASP command: qos_cgi_support_qos_down_streaming();
Can't find handler for ASP command: qos_cgi_get_bandwidth("AlertMessage");
Can't find handler for ASP command: qos_cgi_get_bandwidth();
Can't find handler for ASP command: qos_cgi_get_mac();
Can't find handler for ASP command: qos_cgi_get_custom_table();
Can't find handler for ASP command: qos_cgi_get_custom_hidden_table();
Can't find handler for ASP command: cdl_cgi_set_hijack(1);
Can't find handler for ASP command: cdl_cgi_set_hijack(0);
killall: syslogd: no process killed
Trend iqos support.....
rm: cannot remove '/tmp/media/nand/qosd.conf': No such file or directory
rm: cannot remove '/tmp/media/nand/qosd.conf': No such file or directory
rm: cannot remove '/tmp/media/nand/rule.trf': No such file or directory
rm: cannot remove '/tmp/media/nand/TmToNtgr_dev_mapping': No such file or directory
rm: cannot remove '/tmp/media/nand/TMDPI/backup/*': No such file or directory
rm: cannot remove '/tmp/media/nand/TMDPI/update/*': No such file or directory
rm: cannot remove '/tmp/media/nand/TMDPI/archive/*': No such file or directory
Creating device nodes...
Insert IDP engine...
Insert forward module /tmp/trend/bw_forward.ko with param - dev_wan=eth0...
Insert tc module...
Run rule agent to setup signature file /tmp/trend/rule.trf...
init done
Info: No FWPT default policies.
[   30.920000] agnat QOS disable!
rmmod: l7_filter: No such file or directory
...refresh rule db
...refresh rule db
...refresh app db
kaShutDown!
Runnig iqos_cli background mode
[   30.980000] ACOSNAT: Set BCMCTF to off
[   30.980000] ACOSNAT: Set NAT for LAN domain only to off
[   30.990000] ACOSNAT: Set ACOS fpath to off
iqos_cli write to /tmp/iqos_detail
iqos_cli write to /tmp/iqos_top_app
if_nametoindex: No such device
if_nametoindex: No such device
if_nametoindex: No such device
rmmod: /lib/modules/2.6.36.4brcmarm+/kernel/lib/AccessCntl.ko: No such file or directory
Doing nvram commit by pid 19299 !
Doing nvram commit by pid 19304 !
Doing nvram commit by pid 19307 !
Doing nvram commit by pid 19310 !
Doing nvram commit by pid 19313 !
Doing nvram commit by pid 19316 !
Doing nvram commit by pid 19319 !
Doing nvram commit by pid 19322 !
Doing nvram commit by pid 19325 !
sh: can't open /etc/init.d/brokerd.sh
[   32.250000] wps_led_ioctl arch/arm/plat-brcm/wps_led.c 115 usb1_led_state=0=>0
[   32.250000] wps_led_ioctl arch/arm/plat-brcm/wps_led.c 132 usb2_led_state=0=>0
[AFP]: 0 partitions found.
[AFP]: disk mountd:0  hfsplus mounted:0
[AFP]: no disk mounted.
/tmp/samba/private/smb.conf: no files!
Doing nvram commit by pid 19360 !
killall: smbd: no process killed
killall: nmbd: no process killed
httpd: ipv6 socket bound in 80.
insmod: usbcore.ko: no module by that name found
insmod: cannot insert '/lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ehci-hcd.ko': File exists (-1): File exists
insmod: cannot insert '/lib/modules/2.6.36.4brcmarm+/kernel/drivers/usb/host/ohci-hcd.ko': File exists (-1): File exists
insmod: usb-storage.ko: no module by that name found
mount: mounting none on /proc/bus/usb failed: Device or resource busy
[   34.730000] IOCTL_AG_REGION_SET: Japanese
[KC] R8500 IPP v1.2 Start (Apr 28 2015 10:47:27)
[Bonjour] Interface: br0 is connected
Start DHCP client daemon
info, udhcp client (v0.9.8) started
eth0: No such process
minidlan :scan files




minidlan:scan finished


localize lang non-us   first-brs English
[Bonjour] MDNS_CheckName: ignorePackets limits.
[Bonjour] default device name = R8500
[Bonjour] Answer Name Start (192.168.1.1)
[KC] R8500 IPP v1.2 Start (Apr 28 2015 10:47:43)
route: ioctl 0x890c failed: No such process
killall: dhcp6c: no process killed
killall: rtsol: no process killed
killall: IPv6-relay: no process killed
killall: pppdv6: no process killed
killall: dhcp6s: no process killed
killall: radvd: no process killed
localize lang non-us   first-brs English
ifconfig: invalid number ''
ifconfig: invalid number ''
route: ioctl 0x890c failed: No such process
killall: dhcp6s: no process killed
killall: radvd: no process killed
############ leafp2p_run = 0 username=0

killall: xagent: no process killed
++++++ run-xagnet.sh ++++++

Hit enter to continue...Doing nvram commit by pid 19172 !
'device_mode' is not found(WEB).
wl: wl driver adapter not found
wl: wl driver adapter not found
No ACL rule order defined! Init all rules order to 0!
Doing nvram commit by pid 19172 !
debug, Sending select for 4.3.2.161...
info, Lease of 4.3.2.161 obtained, lease time 43200
[   59.390000] ACOSNAT: Set BCMCTF to on
[   59.390000] ACOSNAT: Set NAT for LAN domain only to on
[   59.400000] ACOSNAT: Set ACOS fpath to on
killall: timesync: no process killed
[   59.460000] AgNat : Cannot find the lan interface br1
[   59.460000] AgNat : Cannot find the lan interface br2
[   59.470000] AgNat : Cannot find the lan interface br3
[   59.470000] AgNat : Cannot find the lan interface br4

NAT Enabled

wan_up: IP addr NOT changed! (4.3.2.161->4.3.2.161) do arp_check!
Hit enter to continue...Hit enter to continue.../var/run/ftpc.pid: no files!
ftpc start!!
ftpc:user=anonymous
ftpc:passwd=WNR3500U@
ftpc:local path=/tmp/firmwareCfg
ftpc:server path=/r8500/jp/fileinfo.txt
ftpc:host=updates1.netgear.com
conn.host=updates1.netgear.com
 init the server information
*** ftpc start ***
host   : updates1.netgear.com
local_path   : /tmp/firmwareCfg
server_path   : /r8500/jp/fileinfo.txt
sin_port   : 21
lsocket.sin_port =5376
username=anonymous,password=WNR3500U@
lsocket.sin_port =18160
Command SIZE error: 550 Could not get file size.
ftpc received error!
ftpc_GotFile, errorcode:0xf5, currentFtpcStatus: 0x33e1
ver_CheckServerID:2,errorcode:0xf5
Hit enter to continue...ftpc_GotFile end, status:0x2, currentFtpcStatus: 0x33e1
ftpc start!!
ftpc:user=anonymous
ftpc:passwd=WNR3500U@
ftpc:local path=/tmp/firmwareCfg
ftpc:server path=/r8500/ww/fileinfo.txt
ftpc:host=updates1.netgear.com
conn.host=updates1.netgear.com
 init the server information
*** ftpc start ***
host   : updates1.netgear.com
local_path   : /tmp/firmwareCfg
server_path   : /r8500/ww/fileinfo.txt
sin_port   : 21
lsocket.sin_port =5376
username=anonymous,password=WNR3500U@
lsocket.sin_port =50933
'device_mode' is not found(WEB).
PING www.netgear.com (13.35.37.124): 56 data bytes
64 bytes from 13.35.37.124: seq=0 ttl=236 time=70.876 ms

--- www.netgear.com ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 70.876/70.876/70.876 ms
wl: wl driver adapter not found
wl: wl driver adapter not found
Command SIZE error: 550 Could not get file size.
ftpc received error!
ftpc_GotFile, errorcode:0xf5, currentFtpcStatus: 0x33e1
ver_CheckServerID:3,errorcode:0xf5
Hit enter to continue...ftpc_GotFile end, status:0x3, currentFtpcStatus: 0x33e1
ftpc start!!
ftpc:user=anonymous
ftpc:passwd=WNR3500U@
ftpc:local path=/tmp/firmwareCfg
ftpc:server path=/r8500/ww/fileinfo.txt
ftpc:host=updates1.netgear.com
conn.host=updates1.netgear.com
 init the server information
*** ftpc start ***
host   : updates1.netgear.com
local_path   : /tmp/firmwareCfg
server_path   : /r8500/ww/fileinfo.txt
sin_port   : 21
lsocket.sin_port =5376
username=anonymous,password=WNR3500U@
No ACL rule order defined! Init all rules order to 0!
Doing nvram commit by pid 19172 !
lsocket.sin_port =62193
Command SIZE error: 550 Could not get file size.
ftpc received error!
ftpc_GotFile, errorcode:0xf5, currentFtpcStatus: 0x33e1
ftpc_GotFile end, status:0x5, currentFtpcStatus: 0x33e1
Hit enter to continue...